eBay FedEx Label Printing
using the Dymo 4XL
June 20, 2019©
Printing FedEx labels from the new eBay label page currently only requires you set the Size to: Fit, in the Adobe print preview. For the original style label, see below:
Here is a workaround for using the Dymo 4XL for printing the standard half sheet horizontal laser/inkjet eBay FedEx label on the 1744907, 4" x 6" labels.
1. Make sure you have turned the receipt half of the label off.
2. Make sure your browser is set to open PDF files with Adobe and not its built in
reader.
3. Create your label and click on Print.
4. When the Adobe print preview opens, select the Dymo 4XL as the Target Printer.
5. Click on Properties next to the Target Printer field.
6. Set Orientation to Landscape, then click on Advanced at the bottom right.
7. In the Advanced window, set the Paper Size to: 4in x 10in (not 6").
8. Further down set the Print Quality to: Barcodes and Graphics.
9. Click “OK”, then “OK” again to go back to the preview.
10. Set Custom Scale to: 80% (then move to another field).
11. Make sure “Choose paper source by PDF page size” is unchecked.
12. Set Orientation to: Landscape.
13. Click Print.
Note: Except for the Custom Scale, if you want the other settings to stick for future labels you will need to change the Printing Preferences in the Control Panel for the Dymo 4XL, and for the Orientation to stick, make it the Default Printer. A quick check of the preview pane with tell you whether the label looks ok, but also check the printed label that it is crisp and complete.
NOTE: The above information is preliminary and subject to change without notice. Please email us if you find a problem, a better solution, or have any suggestions or comments.